Mornin n’alln’all
Ta muchly for the warming cuppa MH …perfect timing as it’s cold and very frosty here too.
The fire kept in from last night so we’ve got that roaring away.
Today is the campervan inspection….it’s going to be a 3-4 hr round trip so Ihope we don’t get called back because they aren’t happy with something.
Please keep your fingers and toes crossed for us as we’ve already had our pre assessment drama with it.
A couple of days ago I gave it a thorough clean out and suddenly noticed the work surface where the sink and hob are inset had warped it was fine pre Xmas so it’s only recently started warping.
One corner of the hob wasn’t in contact with the surface by about 1/2 cm and the sealant had pulled away …and the sink had completely popped out from its sealant by 1cm all around
So 2 reinforcing bars attached underneath , all resealed, and drainage system reattached. All good to go!…phew!
Good job I didn’t leave the cleaning until last thing as OH had to go and buy the sealant and it was a bit of a long job,
Its definitely a learning curve converting a van into a camper and there are one or two minor things we might have done slightly differently in retrospect but we’re more than chuffed with our results.
Still got the seat covers to make so throws are taking their place at the moment.
I wonder how Snadge is getting on with his ?
Must go and top up the bird feeders and leave out some fresh water for the wildlife before I forget.
Looks like it’s going to be a thermals day today ( steady on there boys!)
Have a great day peeps!
Ta muchly for the warming cuppa MH …perfect timing as it’s cold and very frosty here too.
The fire kept in from last night so we’ve got that roaring away.
Today is the campervan inspection….it’s going to be a 3-4 hr round trip so Ihope we don’t get called back because they aren’t happy with something.
Please keep your fingers and toes crossed for us as we’ve already had our pre assessment drama with it.
A couple of days ago I gave it a thorough clean out and suddenly noticed the work surface where the sink and hob are inset had warped it was fine pre Xmas so it’s only recently started warping.
One corner of the hob wasn’t in contact with the surface by about 1/2 cm and the sealant had pulled away …and the sink had completely popped out from its sealant by 1cm all around
So 2 reinforcing bars attached underneath , all resealed, and drainage system reattached. All good to go!…phew!
Good job I didn’t leave the cleaning until last thing as OH had to go and buy the sealant and it was a bit of a long job,
Its definitely a learning curve converting a van into a camper and there are one or two minor things we might have done slightly differently in retrospect but we’re more than chuffed with our results.
Still got the seat covers to make so throws are taking their place at the moment.
I wonder how Snadge is getting on with his ?
Must go and top up the bird feeders and leave out some fresh water for the wildlife before I forget.
Looks like it’s going to be a thermals day today ( steady on there boys!)
Have a great day peeps!
Comment