When I took over my plot there were a number of items laying about one being a 19KG gas tank. These are difficult things to dispose of so it was recycle time.
I first removed the valve and left it to air for a couple of days to clear out any traces of gas.
I took it home where there is power and with a 4 inch disk cutter I cut around just inside the carry handle and down the side in front of the handle to the first weld.
I then cut holes above the base weld line and between the welds where the base is joined on so that solid metal remains above the welds.
It burns very hot with dry wood but needs the odd poke in the holes with very ashy waste.
It took a little over an hour of disk cutter work to complete the job.
I first removed the valve and left it to air for a couple of days to clear out any traces of gas.
I took it home where there is power and with a 4 inch disk cutter I cut around just inside the carry handle and down the side in front of the handle to the first weld.
I then cut holes above the base weld line and between the welds where the base is joined on so that solid metal remains above the welds.
It burns very hot with dry wood but needs the odd poke in the holes with very ashy waste.
It took a little over an hour of disk cutter work to complete the job.
Comment