i have an idea but im not sure what you are really aiming for, if i had the poles i would maybe do somethong like this:
i think i saw you could have 6*8' poles,drill a 20mm hole in the side of the top of each pole about 10 cm maxi from the top,, share your poles out over an area= lets say 1.5m between each pole so , an openenig at the front and back of 1.5m then 3 poles on the left then 3 on the right each equidistant 1.5m now, support all of these however you wish, bamboo canes all around top and bottom then a few x's (crossed over bamboos/bars whatever?) around the place,
take a hose from your tap,
zip tie it up the first right hand pole for example
feed it into the first pole pull it out of the new hole you drilled at 10 cm, take it over to the pole to your left and do the same then cross over to the 2nd pole on the right (this hose can be pierced for auto watering, do it lightly with a pin and it will make a fine spray ,,)and when you get to the last pole instead of just capping off your hose , zip tie it down the pole and put either a tap on it or a spray hose end so that when you use your hose or tap behind the new auto watering greenhouse or shed or whatever you cover it with, it will turn on the watering inside?
i would do something like that anyway? that is just a quick idea/explanation i have just come up whilst reading this, if you want anymore enlightenment on it just let me know and i cold think of improvements
i think i saw you could have 6*8' poles,drill a 20mm hole in the side of the top of each pole about 10 cm maxi from the top,, share your poles out over an area= lets say 1.5m between each pole so , an openenig at the front and back of 1.5m then 3 poles on the left then 3 on the right each equidistant 1.5m now, support all of these however you wish, bamboo canes all around top and bottom then a few x's (crossed over bamboos/bars whatever?) around the place,
take a hose from your tap,
zip tie it up the first right hand pole for example
feed it into the first pole pull it out of the new hole you drilled at 10 cm, take it over to the pole to your left and do the same then cross over to the 2nd pole on the right (this hose can be pierced for auto watering, do it lightly with a pin and it will make a fine spray ,,)and when you get to the last pole instead of just capping off your hose , zip tie it down the pole and put either a tap on it or a spray hose end so that when you use your hose or tap behind the new auto watering greenhouse or shed or whatever you cover it with, it will turn on the watering inside?
i would do something like that anyway? that is just a quick idea/explanation i have just come up whilst reading this, if you want anymore enlightenment on it just let me know and i cold think of improvements
Comment