Announcement

Collapse
No announcement yet.

Storm proof greenhouse

Collapse

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Storm proof greenhouse

    Hi I have fixed my policarbonate greenhouse few time and last time has hold the first 3 storms and I was happy about it but Desmond the last storm proved me wrong. The problem is the roof and this time that I had glued the sheets at the frame with clip and blob of silicone to hold the w clip in place not only the sheets blow away but even the metal piece in the middle that hold the piece together is gone (luckily I found it at the back street). So now the problem number one is that the policarbonate sheets are the cheaply one from b&q and not the twin wall. So now I bought some twin wall 4mm policarbonate sheets and I want to repair. What do you suggest? It's only a 6x4 greenhouse.
    Last edited by Sarico; 06-12-2015, 11:35 PM.

  • #2
    Fix some timber battens inside the greenhouse & screw the polycarb to it.
    sigpic�Gorillas are very intelligent, but they don't have to be as delicate as chimps -- they can just smash open the termite nest,�
    --------------------------------------------------------------------
    Official Member Of The Nutters Club - Rwanda Branch.
    -------------------------------------------------------------------
    Sent from my ZX Spectrum with no predictive text..........
    -----------------------------------------------------------
    KOYS - King Of Yellow Stickers..............

    Comment


    • #3
      Great idea thanks. I also will put some silicone on the bolt so when is windy the don't get loose. That why the metal piece came off

      Comment


      • #4
        Sorted!
        "Nicos, Queen of Gooooogle" and... GYO's own Miss Marple

        Location....Normandy France

        Comment


        • #5
          Get the right silicone there are many different varieties for many different purpose's. For instance if you use sanitary silicone if will have very poor 'grab' adhesion to metal.
          Potty by name Potty by nature.

          By appointment of VeggieChicken Member of the Nutters club.


          We hang petty thieves and appoint great ones to public office.

          Aesop 620BC-560BC

          sigpic

          Comment


          • #6
            Originally posted by Potstubsdustbins View Post
            Get the right silicone there are many different varieties for many different purpose's. For instance if you use sanitary silicone if will have very poor 'grab' adhesion to metal.
            Any suggestion of what I have to look? What about grab adhesive like no nail stuff? I had use the bathroom silicone because I had half cartridge left from the bath.

            Comment


            • #7
              I use Evo-Stik 'Sticks Like Sh*t' .......good bond to wood, plastic, brick and metal. Is unaffected by extremes of temperature and is for external use.

              Sorry mods but that is really what it is called, says so on the tube.
              Potty by name Potty by nature.

              By appointment of VeggieChicken Member of the Nutters club.


              We hang petty thieves and appoint great ones to public office.

              Aesop 620BC-560BC

              sigpic

              Comment


              • #8
                If you go with BMs suggestion use strapping on the outside as screw heads are too small to fix securly
                it may be a struggle to reach the top, but once your over the hill your problems start.

                Member of the Nutters Club but I think I am just there to make up the numbers

                Comment


                • #9
                  Originally posted by Potstubsdustbins View Post
                  I use Evo-Stik 'Sticks Like Sh*t' .......good bond to wood, plastic, brick and metal. Is unaffected by extremes of temperature and is for external use.

                  Sorry mods but that is really what it is called, says so on the tube.
                  I can vouch for my friend. I have a tube of it in my shed. btw, it is odourless

                  Comment


                  • #10
                    I have a greenhouse in a windy location where lots of glass has been broken and then replaced with polycarb, to combat the wind issues I have siliconed the panels, but I have also added a tumble drier vent ( like this ) which relieves any build up of pressure in the GH when the wind blows over the top (which usually pops the panels out).

                    This has worked upto now in winds over 70mph.

                    HTH

                    Comment

                    Latest Topics

                    Collapse

                    Recent Blog Posts

                    Collapse
                    Working...
                    X