I have very bad ground .... it was a site that was built up by over 20' back in 30's to become a railway sidings .... what they built it up with is steel works slag & subsoil from nearby A road they were digging through a hill.
Disused since 60's it became eventually a SelfBuild site.
For my main veg plots I built up high raised beds and imported soil ... and over a couple of years with loads of manure & sharp sand have got this to good condition and very fertile.
But for borders and ground level beds ... although I dug out the 'sub soil' to a depth of 24' and put in imported soil it is very heavy - with high clay content, gets waterlogged.
Due to established plants SWMBO won't let me Rotovate it, so mass addition of anything is not an option.
I have come up with a plan B
I bought a hand operated 4" diameter Auger ... and have the idea that every 2' or so will bore put a 4" hole around 2' deep and fill it with sharp sand ... and top the last 2" with good loam.
Physically tried it and it bores the holes easily.
My thoughts being 2 fold ... vertical drainage will allow (by hydrostatic pressure) water to seep into the sand filled 'tubes' and help drain the ground.
and secondly over time the sand will mix in with soil by worm action etc. ,,, and improve the soil.
Anybody see any issues with this …. And maybe any improvement …. maybe something other than just sharp sand into the holes ?
Disused since 60's it became eventually a SelfBuild site.
For my main veg plots I built up high raised beds and imported soil ... and over a couple of years with loads of manure & sharp sand have got this to good condition and very fertile.
But for borders and ground level beds ... although I dug out the 'sub soil' to a depth of 24' and put in imported soil it is very heavy - with high clay content, gets waterlogged.
Due to established plants SWMBO won't let me Rotovate it, so mass addition of anything is not an option.
I have come up with a plan B
I bought a hand operated 4" diameter Auger ... and have the idea that every 2' or so will bore put a 4" hole around 2' deep and fill it with sharp sand ... and top the last 2" with good loam.
Physically tried it and it bores the holes easily.
My thoughts being 2 fold ... vertical drainage will allow (by hydrostatic pressure) water to seep into the sand filled 'tubes' and help drain the ground.
and secondly over time the sand will mix in with soil by worm action etc. ,,, and improve the soil.
Anybody see any issues with this …. And maybe any improvement …. maybe something other than just sharp sand into the holes ?
Comment